Connector Type:
SC/APC (Angled Physical Contact) – Ensures low back reflection for single-mode applications.
Flat Drop Cable Compatibility – Designed for flat/oval drop cables (typically 2mm x 3mm or similar).
Field-Installable Design:
No epoxy or polishing required (uses mechanical splice or crimp technology).
Quick termination (under 2 minutes per connector).
Cable Compatibility:
Works with flat drop cables (e.g., 1.6mm x 2.9mm, 2mm x 3mm).
Supports single-mode fiber (SMF) with APC polish.
Performance:
Insertion Loss: < 0.3 dB (typical).
Return Loss: > 60 dB (APC standard).
Durability & Weather Resistance:
Some variants include weatherproof sealing for outdoor use.
Reinforced strain relief for drop cable applications.
Advantages Over Standard SC/APC Connectors:
✔ Optimized for flat drop cables – No need for round cable adapters.
✔ No polishing required – Uses pre-polished stub fiber for fast termination.
✔ Ideal for FTTH deployments – Quick field installations in aerial, duct, or buried applications.
Installation Steps (General Process):
✔ Strip the flat drop cable to expose the fiber.
✔ Cleave the fiber to the correct length (using a precision cleaver).
✔ Insert the fiber into the connector’s pre-aligned ferrule.
✔ Crimp or clamp the connector onto the cable for secure retention.
✔ Optional: Heat-shrink strain relief for rugged environments.
Common Applications:
✔ Fiber-to-the-Home (FTTH) last-mile connections.
✔ Outdoor broadband installations (e.g., GPON networks).
✔ Aerial or direct-buried drop cable terminations.
