✅ Connector Type:
SC/UPC – Ensures low back reflection (>60 dB) for high-performance single-mode networks.
Fusion Splice Design – Uses a pre-installed fiber stub inside the connector for fast splicing.

✅ Fast Field Termination:
No polishing required – The internal stub is pre-polished.
Fusion splicer compatible – Works with most splicers (e.g., Fujikura, Sumitomo, INNO).
Quick installation (~1-2 min per connector) – Faster than epoxy/polish methods.

✅ Performance:
Insertion Loss: <0.3 dB (typical).
Return Loss: >50 dB (UPC standard).

✅ Cable Compatibility:
Works with 250µm, 900µm, 2mm, and 3mm cables (depending on model).
Ideal for indoor/outdoor patch cords, drop cables, and distribution fibers.

✅ Durability:
Heat-shrink splice protection for strong, reliable splices.
Strain relief boot for cable protection.

🔹 Installation Steps (Fusion Splicing Method)

✔ Strip & Clean the fiber cable.
✔ Cleave the fiber with a precision cleaver (~8-10mm length).
✔ Fusion Splice the fiber to the connector’s pre-installed stub.
✔ Protect Splice with included heat-shrink sleeve.
✔ Secure Connector by closing the housing and crimping if needed.
✔ Test with an OTDR or light source/power meter.

🔹 Advantages Over Other Field Connectors

✔ Lower loss than mechanical splice connectors.
✔ More reliable than no-polish/crimp connectors.
✔ Faster than epoxy/polish methods.