✔ High channel counts;
✔ Low excess loss;
✔ Low PDL;
✔ Wide Operatin Wavelength;
✔ High stability and reliability.

✔ Type: Planar Lightwave Circuit (PLC) Splitter;
✔ Configuration: 1x32 (1 input port, 32 output ports);
✔ Connector Type: SC/UPC (Blue connector, Ultra Physical Contact polish);
✔ Housing Material: ABS (Acrylonitrile Butadiene Styrene);
✔ Durable, flame-retardant, and cost-effective enclosure;
✔ Fiber Type: Single-mode (SMF);
✔ Compatible with wavelengths: 1310nm, 1490nm, 1550nm (standard PON wavelengths).

✔ FTTH (Fiber-to-the-Home) Networks;
✔ Used in GPON/EPON/XGSPON systems to distribute signals to multiple subscribers;
✔ Passive Optical Networks (PON);
✔ Splits OLT (Optical Line Terminal) signals to 32 ONT (Optical Network Terminal) units;
✔ CATV & RF Overlay Systems;
✔ Distributes video signals alongside data in hybrid fiber-coaxial networks;
✔ Data Center Interconnects;
✔ Optical signal distribution for monitoring or redundancy.

Installation Notes

Input Power Limitation: Ensure input power does not exceed +23dBm to avoid nonlinear effects.

Bend Radius: Maintain >30mm bend radius to avoid micro-bend losses.
Connector Care: Keep SC/UPC ports dust-free (use caps when unused).

FAQ

Q: Can this splitter work with APC connectors?
A: No, SC/UPC is incompatible with SC/APC due to polish angle differences. Use a hybrid coupler if needed.

Q: Is it bidirectional?
A: Yes, but upstream signals (ONT→OLT) will experience additional loss due to splitter attenuation.

Q: Can I cascade two 1x32 splitters for 1x64 splitting?
A: Technically yes, but total loss will exceed 35dB, limiting practical reach. Use a 1x64 PLC splitter instead.

Q: Vendors?
A: articfiber.com, Huawei, Broadex, and FIBERON offer reliable ABS PLC splitters.